SynLube™ Lube-4-Life^®

SynLube™    Lube-4-Life ^®

UNIVERSAL ATF-5

for Automatic Transmissions

Viscosity Index VI = 210

Minimum Operating Temperature -65°F (-54°C)

Maximum Operating Temperature +520°F (+270°C)

(Time/Miles)             10 Years or 150,000 Miles

(Transmission Hours)                  3,000 Hours

(Return to Manufacturer for re-processing)

Higher Wear number represents longer transmission life in percent.

Actual saving varies with application because of different automatic transmission designs.

SynLube^™ UNIVERSAL ATF intended for use in all Automotive, Truck, Bus, Industrial and Agricultural applications in Automatic and Semi-automatic Transmissions and in Hydraulic and Power Steering systems where the use of Petroleum or Synthetic ATF is recommended by the OEM (Original Equipment Manufacturer).

SynLube^™ UNIVERSAL ATF can be used in all climatic conditions during all seasons because of its UHVI (Ultra High Viscosity Index) of VI=210.

SynLube^™ UNIVERSAL ATF is a truly UNIVERSAL ATF because it can be used in all Automatic Transmissions where Dexron® ATF Fluid is specified and in most Hydraulic and Power Steering Systems.

SynLube^™ UNIVERSAL ATF is NOT designed to be used in following applications:

	DO NOT USE in Ford applications that require Type F ATF
	DO NOT USE in Citroën or Rolls-Royce hydraulic systems that require "Green Fluid"
	DO NOT USE instead of nor mix with DOT 3, DOT 4, DOT 5 or DOT 5.1 Brake Fluids

SynLube^™ UNIVERSAL ATF is a 100% fully synthetic, super premium, multi-functional fluid
and lubricant.

SynLube^™ UNIVERSAL ATF is engineered to permanently replace conventional Petroleum ATF in most severe operating conditions in high performance automatic transmissions in highway, off-highway, farm fleets, and industrial applications.

SynLube^™ UNIVERSAL ATF  is a synergetic blend of man-made liquid and solid chemically inert lubricants that are thermally stable from -65°F (-54°C) to over 520°F (270°C).

The sub-micronic particles of Graphite are colloidally suspended in a mixture of synthetic liquid lubricants.

SynLube^™ UNIVERSAL ATF does not oxidize nor decompose like conventional Petroleum or Synthetic ATFs. It can be therefore used, without changes, for up to lesser of:

Product Performance

SynLube^™ UNIVERSAL ATF exceeds all of the following performance requirements:

SynLube^™ UNIVERSAL ATF  offers following additional benefits:

Based on available toxicological information, this product produces no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene, including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Also eye protection with suitable protective eyewear is suggested during handling and installation. In case of eye contact flush with plenty of water.

One Liter [33.8 US Oz.] plastic bottle

Use UNIVERSAL ATF in "dry-fill" applications or in vehicles where ALL ATF can be completely drained (some FORD models and ALISON transmissions)

Use SERVICE FILL ATF in all applications where there is no provision for draining of ALL ATF from torque converter (GM, TOYOTA, HONDA, NISSAN, etc.) This version is specifically designed to be mixed with the leftover conventional ATF (as long as it is still clean, not burned or not turned brown or black) - ideally this product should be installed into vehicle at about 2,500 to 5,000 miles, for maximum performance benefit and durability. If installed into high mileage vehicle contact SynLube, Inc. for additional service recommendations.

[ Home ] [ Up ]

Send mail to synlube@aol.com with questions or comments about this web site.
Copyright © 1996-2007 SynLube, Inc.
Last modified: April 14, 2007

Lube-4-Life^® is a Registered Trademark of SynLube, Inc.