SynLube™ Lube-4-Life^®

SynLube™ Stop-4-Life™

DOT 3/4 -- 100% Synthetic Brake Fluid

DOT 5.1 -- Non-Silicone Synthetic Brake Fluid

DOT 5.1 -- Non-Silicone Synthetic Brake Fluid
                        (Extra Long-Life version)

Product Description

DOT 3/4 -- 100% Synthetic Brake Fluid

100% synthetic fluid for hydraulically actuated-brake and clutch systems.

DOT 3/4 fluid is suitable for up-grade from conventional DOT 3 or DOT 4.

Fluidity specially designed for anti-locking brake systems (ABS).

Fully compatible and miscible with Conventional Brake Fluids.

This version is clear and pale blue in color to distinguish it from conventional fluids which are clear to amber.

No special procedures are required when bleeding and replacing conventional system fluids with SynLube^™ Stop-4-Life^™ Brake Fluids.

Typical service life 24 months for DOT 3/4 Formula

DOT 5.1 -- Non-Silicone Synthetic Brake Fluid

LONG LIFE 100% synthetic fluid for hydraulically actuated-brake and clutch systems. (Based on Polyglycol chemistry).

DOT 5.1 NON-SILICONE BASE suitable for up-grade from DOT 3 or DOT 4.

Fluidity specially designed for anti-locking brake systems (ABS).

Fully compatible and miscible with Conventional Brake Fluids.

This version is crystal clear and has extra solvency which has the ability to clean and put into suspension gum and sludge deposits formed by conventional brake fluids.

No special procedures are required when bleeding and replacing conventional system fluids with SynLube^™ Stop-4-Life^™ Brake Fluids.

Typical service life 60 months for DOT 5.1 Standard Formula

DOT 5.1 -- Long-Life Non-Silicone Synthetic

EXTRA LONG LIFE 100% synthetic fluid for hydraulically actuated-brake and clutch systems. (Based on Polyglycol chemistry).

DOT 5.1 NON-SILICONE BASE suitable for up-grade from DOT 3 or DOT 4.

Fluidity specially designed for anti-locking brake systems (ABS).

Fully compatible and miscible with Conventional Brake Fluids.

This version has extra anti corrosion additives that protect ferrous, white and yellow metal brake system components.

This fluid is clear and golden yellow in color.

No special procedures are required when bleeding and replacing conventional system fluids with SynLube^™ Stop-4-Life^™ Brake Fluids.

Typical service life up to 10 years for DOT 5.1 Extra Long Life Formula

Key Benefits

Exceeds all following STANDARDS :

Minimum Operating Temperature:    -65°F (-54°C)

Maximum Safe Operating Temperature:    +365°F (+185°C)

Viscosity:    820 CentiPoise @ -40°F (-40°C)

Wet boiling point:

DOT 3/4                       +347°F (+175°C)

DOT 5.1 Standard     +365°F (+185°C)

DOT 5.1 Long Life     +424°F (+218°C)

Dry boiling point:

DOT 3/4                       +500°F (+260°C)

DOT 5.1                       +585°F (+307°C)

Health and Safety

Based on available toxicological information, this product produces no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene, including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Also eye protection with suitable protective eyewear is suggested during handling and installation. In case of eye contact flush with plenty of water.

Packaging

SynLube^™ Stop-4-Life^™ DOT 3/4 Brake Fluid is available in:

SynLube^™ Stop-4-Life^™ DOT 5.1 Brake Fluid is available in:

SynLube^™ Stop-4-Life^™ DOT 5.1 (Extra Long-Life Version) Brake Fluid is available in:

Pricing

[ Home ] [ Up ]

Send mail to synlube@aol.com with questions or comments about this web site.
Copyright © 1996-2007 SynLube, Inc.
Last modified: April 14, 2007

Lube-4-Life^® is a Registered Trademark of SynLube, Inc.